Advertisement
9
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front. Secure using two 1/4-20x1½" screws, 7mm lock washers, and 7mm flat washers on each side.
NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN
ASSEMBLED TO CART.
10
Insert left and right grease tray rails into slots
Attach right and
A
18
Front brace
left rails under front brace with two #8x3/8" self-tapping screws, shown B.
Grease tray opening
Left rail
Right rail
beneath grease tray opening in upper back panel, shown A.
Door
Hinge Pin
7mm flat
7mm lock
washer
washer
Front Brace
Left rail
#8x3/8"
self-tapping screw
1/4-20x1½"
screw
B
Right rail
Advertisement
