Yamaha RX-V596RDS Owner's Manual page 54

PRESET REMOTE CONTROL
Returning to the factory-set codes
To return to the factory-set codes in all positions, follow
these steps.
1
Press i (right) and j (left)
at the same time for about
four seconds.
The indicator flashes twice.
2
Enter the code number
"9990".
Make sure that the indicator
flashes twice.
52
To return to the factory-set codes in each position, follow
these steps.
1
Set the selector dial to the
position for the
component to be returned
to the factory-set code.
2
Press i (right) and j (left)
at the same time for about
four seconds.
The indicator flashes twice.
3
Enter the code number
"0000".
Make sure that the indicator
flashes twice.
The following codes are factory set.
Selector dial
Component
position
TV TV
CBL/SAT Satellite tuner 0006
VCR VCR
DVD/LD DVD player
CD CD player
TAPE/MD Tape deck
AMP/TUN this unit
DSP/TUN this unit
We recommend that you write all the code numbers you
have set on the "Quick Reference Card".
Code
0101
0002
0008 (YAMAHA DVD player)
0005 (YAMAHA CD player)
0004 (YAMAHA Tape deck)
0003
0013