Connecting The Fm And Am Antennas - Yamaha RX-V557 Owner's Manual

Yamaha rx-v557: owners manual
Hide thumbs Also See for RX-V557:
Table of Contents

Advertisement

Connecting the FM and AM
antennas
Both FM and AM indoor antennas are included with this
unit. In general, these antennas should provide sufficient
signal strength. Connect each antenna correctly to the
designated terminals.
Indoor FM antenna
(included)
TUNER
75 UNBAL.
FM
GND
ANT
ANT
Ground (GND terminal)
For maximum safety and minimum
interference, connect the antenna
terminal to a good earth ground. A good earth
ground is a metal stake driven into moist
earth.
Connecting the AM loop antenna
1
Set up the AM loop antenna, then connect it
to the terminals on this unit.
2
Press and hold the tab to insert
the AM loop antenna lead wires
into the AM ANT and GND
terminals.
3
Orient the AM loop antenna
for the best reception.
AM loop antenna
(included)
AM
GND
Notes
• The AM loop antenna should be placed away from this unit.
• The AM loop antenna should always be connected, even if an
outdoor AM antenna is connected to this unit.
• A properly installed outdoor antenna provides clearer reception
than an indoor one. If you experience poor reception quality, an
outdoor antenna may improve the quality. Consult the nearest
authorized YAMAHA dealer or service center about outdoor
antennas.
CONNECTIONS
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents