Yamaha RX-10 Owner's Manual page 9

<
U.K. and Europe models
To record a source to tape (or dub from tape to tape)
* It is recommended to use the tape deck 2 as a recording
tapedeck.
1
Select the source to be recorded.
AUX/TAPE 2/TAPE 1/CD/TUNER/PHONO
2
Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 11.)
VOLUME
0
When you listen with headphones
Connect the headphones to the PHONES jack. When listening
with headphones privately, set both the SPEAKERS A and B
switches to the OFF position.
>
1 2
4
INPUT
l0
<
General model
3
Begin recording on the tape deck.
4
If the tape deck 2 is used for recording, you can
monitor the sound being recorded (or to be recorded)
by pressing the TAPE 2 MONITOR button so that
"TAPE MONITOR 2" lights up on the display.
TAPE 2
MONITOR
Note
VOLUME, BASS, TREBLE and BALANCE controls and PURE
DIRECT switch settings have no effect on the material being
recorded.
>
1 2
4
TAPE MONITOR 12
PHONES
9