Download Print this page

Kenwood KT-592 Instruction Manual page 5

Fm/mw/sw tuner
Hide thumbs Also See for KT-592:

Advertisement

A Caution: Read this page carefully to ensure
safe operation.
12. Carts and stands - An appliance and cart combination
should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance
and cart combination to overturn.
13. Nonuse periods - The power cord of the unit should
be unplugged from the outlet when left unused for a
long period of time.
14, Abnormal smell - {f an abnormal smell or smoke is
detected, immediately turn the power OFF and pull out
the power cord. Contact your dealer or nearest service
"ee
POWER OFF
15. Damage
requiring service - The unit should be
serviced by qualified service personnel when:
A. The power-supply
cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the enclosure
damaged.
16. Servicing - The user should not attempt to service the
unit
beyond
that
described
in the
operating
instructions. All other servicing should be referred to
qualified service personnel.
17, Outdoor antenna grounding - If an outside antenna is
connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built up static charges. Section 810
of the National Electrical Code, ANSI/ NFPA No. 70 -
1984, provides information
with respect to proper
grounding of the mast and supporting structure,
grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See
Figure.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
,
EQUIPMENT
| sg
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
~ ~
GROUND CLAMPS
rouuat———— POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC ~ NATIONAL ELECTRICAL CODE
{NEC ART 250, PART H)
18. Power
lines - An outdoor antenna should
be located
away from power lines.
19. AC outlets - Do not connect other audio equipment
with a power consumption larger than that specified to
the AC outlet on the rear panel.
Never connect other
electrical units, such as an iron or toaster, to it to
prevent fire or electric shock.
Ml,
a
ey
ee
a
ee
1. Item 3 is not required except for grounded or polarized equipment.
2. Item 17 and 18 are not required except for units provided with antenna terminals.
3. Item 17 complies with UL in the U.S.A.
KT-592/KT-592S (En)
5

Advertisement

loading

This manual is also suitable for:

Kt-592s