Download Print this page

Kenwood KT-592 Instruction Manual page 3

Fm/mw/sw tuner
Hide thumbs Also See for KT-592:

Advertisement

Before applying power
A Caution: Read this page carefully to ensure
safe operation.
a
REE
ET RT,
|
For the U.S.A. and Canada
Important!
Units shipped to the U.S.A. and Canada are designed for
operation on 120 valts AC only
CAUTION: To PREVENT ELECTRIC SHOCK DO NOT USE
The AC PLUG WITH AN EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240 volts
AC only.
The mains plug must be removed from the wall socket prior to
any internal examination,
The wires in this mains lead are coloured in accordance with the
following code:
'The wires in this mains lead must be connected to the terminals
in the plug as follows:
Wire colour
Plug terminal marking
N or Black
L or Red
Brown to
Live
Blue to
Neutral
ca)
Plug
Notes:
1. If a 13 - amp plug is used, this must be fitted with a 5 - amp
fuse.
2. if a 3- pin plug with earthing contact is used, no wire must be
connected to the E terminal.
Safety precautions
For Australia and Europe
Important!
Units shipped to Australia are designed for operation on
240 V AC only.
Units shipped to Europe are designed for operation on
230 V AC only.
For other countries
important!
Units shipped to countries other than the above countries are
equipped with an AC voltage selector switch on the rear panel.
Refer to the following paragraph for the proper setting of this
switch,
AC voltage selection
This unit operates on 110 - 120 or 220 - 240 volts AC. The AC
voltage selector switch Type A or Type B on the rear panel is
set to the voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your AC
outlet, make sure that the setting position of this switch
matches your line voltage. If not, it must be set to your
voltage in accordance with the following direction.
Note:
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
AC voltage selector switch
—_—
——
AC110-
120V ~
AC2Z20V~
AC240V~
i—
mall
AC1T10V-
<™ AC220V-
120V~
240V~
Mave switch lever to match your line voltage
with a small screwdriver or other pointed tool.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER
(OR BACK).
NO USER - SERVICEABLE
PARTS
INSIDE,
REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, {S$
INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED * DANGEROUS VOLTAGE *
WITHIN
THE PRODUCT'S
ENCLOSURE
THAT MAY
BE OF SUFFICIENT
MAGNITUDE
TO
CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION
POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE
OF IMPORTANT
OPERATING
AND
MAINTENANCE
(SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
KT-592/KT-592S (En)
3
iN
A
Me et
PR A
te
a

Advertisement

loading

This manual is also suitable for:

Kt-592s