Download Print this page

Kenwood KT-592 Instruction Manual page 11

Fm/mw/sw tuner
Hide thumbs Also See for KT-592:

Advertisement

In case of difficulty
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the
table below to see if the problem can be corrected before seeking help from your dealer or service representative.
Symptom
Power cannot be tuned ON.
Radio stations cannot be received.
A station which was preset cannot
be received by pressing the corre-
sponding numeric key.
interference.
Notes:
@ The power cord is disconnected from the
wall AC outlet.
@ No antenna is connected.
@ The broadcast band is not set properly.
@ The frequency of the desired station is
not tuned.
@ The preset station belongs to a frequency
that cannot be received.
@ The preset memory was cleared because
the power cord had been unplugged for a
long period of time.
@ Noise due to ignition noise of an auto-
mobile.
@ Noise due to an influence from an electric
appliance.
@ Noise due to a nearby TV set,
@ Insert the power cord securely into the
wall AC outlet.
@ Connect an antenna.
@ Set the broadcast band properly.
@ Tune the frequency of the desired station.
@ Preset a station with a receivable fre-
quency.
@ Preset the station again.
@ Instail the outdoor antenna apart from the
road.
@ Turn off the power of the appliance.
@ Install the system more apart from the TV
set.
1. This system is microprocessor-controlled, so malfunction may occur due to external noise or interference noise. In such a case, unplug the
power cord, plug it and turn power on again.
2, Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they may
deform the plastic components.
KT-592/KT-592S (En)
11
es
OS
a

Advertisement

loading

This manual is also suitable for:

Kt-592s