Mec 8567 Grabber Manual

SHOTSHELL RELOADING WITH THE
Model
8567 Grabber
Mayville Engineering Company, foremost manufacturer
of reloading equipment in America, is widely respected
for its continuing dedication to precision engineering.
This precision is incorporated into every one of MEC's
"New Generation" reloaders rendering truly innovative
and efficient engineering designs.
The MEC Model 8567 Grabber is no exception. It is the
latest in our line of progressive machines. The Model
8567 Grabber allows you to resize any high or low
brass shells manufactured in the U.S.A. It can be con¬
verted to reload 3" and will reload steel shot.
To convert to 3" (12 & 20 ga. ONLY), Kit No. 8582 is
necessary. REFER TO INSTRUCTION SHEET EN¬
CLOSED IN KIT.
This reloader will allow you to reload with steel
shot. To convert to steel shot, Kit No. 8581 is
necessary.
However, if you already have a 3" kit, you need only
order our single stage steel shot adaptor Kit No.
8433.
If you do not have our 3" kit, it is necessary to
order progressive steel shot Kit. No. 8581.
A special steel shot charge bar must be used when
loading steel shot. Do not use charge bars de¬
signed for lead shot when loading steel shotshells.
Common sense precautions are advised. Care¬
less handling of flammables and explosives
can result in serious injury. We endorse check¬
ing charges with a reliable scale which will
disclose variations in powder weights. Adher¬
ing to loads recommended by the powder
manufacturer is a must and the use of safety
glasses is strongly encouraged. We dis¬
claim any liability for damage or injury result¬
ing from reloading shotshells.
We disclaim any liability resulting from the use
of any parts or accessories not manufactured
or recommended by MEC.