Pioneer LaserDisc CLD-2850 Operating Instructions Manual page 17

aed
With LD discs not containing a TOC...
Zz. time DISPLAY is pressed, the display changes in the
2 wing order: time/frame number — display off.
With CDV discs...
time DISPLAY is pressed, the display changes in the
wing order: elapsed play time of the track being played
MAIN TRK (remaining play time of the track being
~+ REMAIN ALL (remaining play time of the video
part being played) -- TOTAL (total play time from
i)
With CD discs ...
Each time DISPLAY is pressed, the dispiay changes in the
following order: elapsed play time of the track being played
> DISC ABS {elapsed play time from the beginning of the
disc} --> REMAIN TRK {remaining play time of the track
being played) + REMAIN ALL {remaining play time of the
disc) -> TOTAL {total play time from the beginning of the
disc} > display off
@ These data are aiso displayed on the display window of
the front panel.
y off.
eae d Frame number > BISC ABS p> REMAIN ALL
Chapter NO.
Frame NO.
CAV disc with a TOC CAV disc with a TOC $ |
y
3 8782 A PLAY —_> 3 8782 =—_— 3 5782 A PLAY
DISPLAY DISPLAY |
Disc | REMAIN |
Ve ABS ry a ALL Pf
| Sdcands Seconds
Minutes
Minutes. i
DISPLAY
~ ~ REMAIN ALL ea TOTAL | [ TOTAL
3:12.49
REMAIN
ALL 37. 08
L Total number of tracks
CAY disc with a TOC
3 5782 A PLAY
TOTAL
Seconds
Minutes
—~ Total number of chapters
To change language mode of the screen display
LANGUAGE on the front panel. Each time this button is
d language mode changes in the following sequence
CH > ITALIANO
setting of the LANGUAGE button will not be erased even if
power is turned off.
ustrations of the screen display found in these Operating
ructions are the case of ENGLISH mode
NOTE:
e screen display is turned on for a long period of time, it is
ucally turned off. To turn the display back en, press any
Audio output level meter display:
During elapsed piay time of the track mode of CD playback or COV
{audio part} playback, the audio output level meter will be displayed
on the monitor screen.
NOTE:
In some cases, the displayed output level may differ from the
actual output level, but this is not a malfunction.
wm Only for your
<_< LEO reference
REP ee
47
<VRB1086>