Pioneer LaserDisc CLD-2850 Operating Instructions Manual page 12

Cd cdv ld player
Hide thumbs Also See for LaserDisc CLD-2850:
Table of Contents

Advertisement

CONNECTIONS
SYSTEM REMOTE CONTROL CONNECTION
WHEN
COMBINED
WITH
OPTIONAL
PIONEER
PROJECTION
MONITOR
{or
COMPONENT
DISPLAY}
Connect the VIDEO OUT jack of the player to the video
input jack of the projection monitor (or component display),
and connect the AUDIO
OUT jacks of the player to the
audio input jacks of the projection monitor {or component
display).
System Control
By connecting the CONTROL
IN jack of the player to the
remote jack of the projection monitor (or component display),
the system can be controlled by the remote control unit of
the player at the remote
control sensor of the projection
monitor (or component display).
@
Use a commercially available cord with mini-plugs (without
load) for the connection.
Please
also refer to the operating
instructions for the
projection monitor (or component display)
NOTE:
When system control connections have been made, the
player cannot be directly controlled by the remote contro!
unit.
To operate the player, aim the remote contro! unit
at the projection monitor for component display).
12
<VRB1086>
PERFORMING
SYSTEM
CONTROL
WHEN
THE
PLAYER
IS COMBINED
WITH
A PRODUCT
THAT
HAS THE fy] MARK
System control can be performed when the player is combined
with an optional AV amplifier, which can provide centralized
control of Pioneer products with the Ei mark.
Connect the VIDEO OUT jack of the player to the video dise
video input jack of the AV amplifier and connect the AUDIO
OUT jacks of the player to the audio input jacks of the AV
amplifier
Connect the CONTROL OUT jack of the AV amplifier to the
CONTROL IN jack of the player using a commercially available
cord with mini-plugs (without load).
@ For details concerning
the connection
and operation
methods, please refer to the operating instructions for the
AV amplifier.
NOTE:
When a connecting cord has been connected to the
CONTROL
IN jack, direct control of the player with the remote control unit
is not possible.
Operate the player with the remote contro!
unit by aiming it at the AV amplifier.

Advertisement

Table of Contents
loading

Table of Contents