Initial Setup; Unpacking; Charging The Karaoke Party Speaker; Operation - RockJam RJK-POP-SOLO User Manual

Initial Setup

Unpacking

Unpack the karaoke party speaker carefully. We recommend that you save the box and packing
materials in case you wish to store the speaker. Before setting up the unit, verify that the
following accessories are present:
• 1 x USB power cable
• 1 x AUX input audio cable
• 1 x Wireless Microphone (RJK-POP-SOLO) or
2 x Wireless Microphones (RJK-POP-DUO)

Charging the Karaoke Party Speaker

Unwind the USB power cable to its full length; connect one end to the DC input jack on the back
of the speaker. Connect the other end to a USB power adapter or PC USB port. The charge
indicator LED will light up red to indicate charging. Charge for at least 4 hours before first use.
The charge indicator LED will go out when the speaker is fully charged.

Operation

Switching the Karaoke Party Speaker On/ Off

Turn the POWER/ VOLUME control forward to switch on. You will feel a click and a chime will
be heard. The speaker will power up in Bluetooth mode and will be actively searching for an
available Bluetooth audio device. To turn the speaker off, turn the POWER/ VOLUME control
anti-clockwise until you feel the click and cannot turn anymore.

Bluetooth Operation

The RockJam Party Speaker is a high-quality Bluetooth speaker. Music can be played through
the Speaker from a compatible Bluetooth device such as a mobile phone or tablet device.
5