Initial Setup; Connecting A Microphone; Charging The Speaker From A Usb Power Supply (Not Supplied) - RockJam RockCube RC-1 User Manual

Initial Setup

Connecting a Microphone

Charging the speaker from a USB Power Supply
(not supplied)
USB
2
BLUETOOTH ETOOTH
P AIR ING
STATUS TUS
MIC
VOL
MIC IN
1
1
7
Microphones:
1. Connect the microphone into
the MIC Socket
Note: Do not drop or tap the
microphone as damage to the
microphone or speaker may
occur.
Do not twist the microphone
cable as it will cause damage to
the internal conductors.
1. Insert the USB
power supply into a
220V-240V AC / 50Hz
switched power outlet.
2. Plug the micro USB
plug into the USB
charging input on the
rear of the RockCube
speaker. Ideally use a
USB power supply
with 2A or higher
output capability.
Note:
Make all connections
before switching on
the AC power.