Table of Contents
Advertisement
Actuation delay time
Operating
temperature range
Operating humidity
range
Storage temperature
and humidity range
Withstand voltage
Insulation resistance
Case construction
Case material
*6
Wetted material
Sealed liquid
Vibration resistant
Impact resistant
Connector
Protection circuit
Weight
Compatible standard
*1 Allowable maximum pressure is the upper limit of pressure value which may safely be applied
to the product and remain in specification once pressure is returned to the rated pressure
range with a couple of times overpressurization for about 10 minutes.
Effects of continuous overpressure are not guaranteed.
*2 Including linearity and hysteresis.
*3 Communication distance between ER40 IR COMMUNICATOR (Sold separately)
*4 Relation between "Output capacity" and "Temperature"
100mA max. (...70℃), 150mA max. (...55℃), 200mA max. (...45℃).
Minimum residual voltage are less than 2.1VDC at 200mA, or less than 1.7VDC at 100mA.
*5 It might be corroded for a polar solvent or strong acids of Acetone, Chloroform or the like.
Also, it has an influence of the stress cracking for a ketone or an ester type.
*6 It may contain O-ring materials, depending on how it is being used.
*7 The power of this device shall be supplied with a NEC Class 2.
Specification of the contact output at factory default.
Item
Mode
Hysteresis mode
OUT1:ON at upper limit setting (H) is 50%F.S. or more
Setting point
OUT2:ON at lower limit setting (L) is 50%F.S. or less
Dead-band
10%F.S.
Delay
0s
Filter
None
50ms
-20 to 70℃
85%RH or less when pressure range is Gage pressure range.
(No freezing, No condensation)
-30 to 80℃, 95%RH or less
(No freezing, No condensation)
Leak current 5mA or less (250VAC (50/60Hz) at 1 minute)
100MΩ or more (at 50VDC)
Indoor use (Standard: IEC 60529, IP code: IP65)
(However, Absolute pressure type ; Standard: IEC60529, IP code: IP67）
*5
SUS304, PES
Diaphragm
SUS316L
Fitting
SUS316L
Silicone oil
Frequency: 10 to 2,000Hz, Acceleration: 200m/s
Acceleration: 1,000m/s
M12 connector (4P)
Reverse polarity protection, Short-circuit (overcurrent) protection
Approximately 100g
*7
UL standard
(Standard No.: UL508 / File No.: E484608)
EMC standard (Standard No.: EN61326-1:2013、EN61326-2-3:2013)
EU RoHS standard
Output specification
TY-CE40-004A
2
, Operation time: 6ms
4/14
2
Remarks
Response
1ms max.
Rev.3
Advertisement
Table of Contents
