Table of Contents
Advertisement
Use Precautions
1.
Wear ANSI-approved safety goggles
and heavy-duty work gloves during use.
2.
Do not exceed the Lathe Stand's
maximum weight capacity of 225 lb.
Be aware of dynamic loading!
Sudden load movement may
briefly create excess load
causing product failure.
3.
Use the Lathe Stand on a flat,
level surface capable of supporting
the weight of the Stand, the
lathe, and the workpiece.
4.
Turn lathe off and disconnect power
before attaching lathe to Stand.
5.
Follow lathe instructions for
mounting and operation.
6.
Do not wear loose clothing or
jewelry as they can be caught in
moving parts. Protective, electrically
non-conductive clothes and non-skid
footwear are recommended when
working. Wear restrictive hair
covering to contain long hair.
Page 4
For technical questions, please call 1-888-866-5797.
7.
This product is not a toy. Do not allow
children to play with or near this item.
8.
Use as intended only. Do
not use the Lathe Stand to
support people or animals.
9.
Inspect before every use; do not use
if parts are loose or damaged.
10. Maintain product labels and
nameplates. These carry
important safety information. If
unreadable or missing, contact
Harbor Freight Tools for a replacement.
11. The warnings, cautions, and instructions
discussed in this instruction manual
cannot cover all possible conditions
and situations that may occur. It must
be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
70595
Advertisement
Table of Contents
