1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Racks & Stands
  5. 2322A-B
  6. Owner's manual & safety instructions

Bauer 2322A-B Owner's Manual & Safety Instructions

Universal lathe stand
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
UNIVERSAL
LATHE
STAND
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
2322A-B
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23e
70595

Advertisement

Table of Contents
loading

Related Manuals for Bauer 2322A-B

Summary of Contents for Bauer 2322A-B

  • Page 1 Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 2322A-B UNIVERSAL LATHE STAND Visit our website at: http://www.harborfreight.com...
  • Page 2 Table of Contents Safety ..............3 Parts Lists and Diagrams ........10 Specifications ............. 3 Warranty ............12 Assembly ............5 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Specifications

    Specifications Adjustable Height 24 1/2" - 34 1/2" Adjustable Length 23 1/2" - 35 1/2" Weight Capacity 225 lb Important Safety Information Assembly Precautions Assemble only according to these Keep bystanders out of the instructions. Improper assembly area during assembly. can create hazards.

  • Page 4: Use Precautions

    Use Precautions Wear ANSI-approved safety goggles This product is not a toy. Do not allow and heavy-duty work gloves during use. children to play with or near this item. Do not exceed the Lathe Stand’s Use as intended only. Do maximum weight capacity of 225 lb.
  • Page 5 Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in this manual, refer to the Parts Lists and Diagram near the end of this manual.
  • Page 6 Attaching Outer Beam to Column Install two M10 Washers and Column two M10 x 80 Hex Bolts through the Outer Beam flange on the Outer Beam (8) Hex Bolt and Column. Install two M10 Washers and two M12 Nuts to the bolts to secure the Outer Beam (8).
  • Page 7 Install two M8 Elastic Washers, Hand tighten the nuts until the Lathe two M8 Washers (18) and two height has been determined. M10 Nuts (19) to the Bolts through the Mounting Platforms. Mounting Platform Washer Washer Hex Bolt Determining Proper Lathe Height Determine the height of your Lathe by With your arm bent at 90°, measure the measuring the distance from the base of...
  • Page 8 Adjusting Adjusting for Lathe Length Measure the length of your Lathe from Once the desired length has been the center of one mounting hole to the set, tighten the two M10 x 20 Hex Bolts center of the other mounting hole. to secure the beams.

  • Page 9: Maintenance And Servicing

    Maintenance and Servicing TO PREVENT SERIOUS INJURY: Disconnect the lathe from the power source before performing any inspection, maintenance, or cleaning on the Lathe Stand. Do not use damaged equipment. If abnormal noise or vibration occurs, turn off the lathe immediately and have the problem corrected before further use. Inspection, Maintenance, and Cleaning BEFORE EACH USE, inspect the general condition of the Lathe Stand.

  • Page 10: Parts List And Assembly Diagram

    Parts List and Assembly Diagram Part Description Part Description Mounting Platform Base Washer M10 Large Washer M12 Hex Bolt M10 x 80 Rubber Foot Nut M10 Clip Column Hex Cap Screws M8 x 25 Inner Beam Elastic Washer M8 Hex Bolt M10 x 20 Washer M8 Outer Beam Nut M8...

  • Page 11: Please Read The Following Carefully

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
  • Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.

Table of Contents