Advertisement
FM STEREO
INDICATOR
Lights when stereophonic
FM broadcast is being received.
TAPE
MONITOR
(1 & 2) BUTTONS
These buttons permit the recorded sound to be monitored
when recording with a tape deck. They also allow listening
to tapes (playback).
ИС
Push this button when tape deck connected
to TAPE 1 (REC & PB) jacks are being used
for playback, or for monitoring a recording
in progress.
и
ats Push this button when tape deck connected
to TAPE
2 (REC & PB or REC/PB
DIN
connector) jacks are being used for playback,
or for monitoring a recording in progress.
TUNING
CONTROL
Turn this knob to tune in desired broadcast station.
FM MUTING
BUTTON
Leave this button undepressed (ON) when listening to FM
broadcasts. This will suppress inter-station noise and weak
interfering stations when tuning in a desired station. If the
desired station is weak, however, push this button to the
OFF (depressed) position.
MIC JACK
Accepts the plug of the microphone. When a microphone
is connected to the MIC jack, the turntable connected to
PHONO
terminals cannot be used. Use a high-impedance
microphone with a standard plug.
FUNCTION
SWITCH
Selects desired program source.
AM:
AM reception.
FM:
FM reception with automatic switching
for
stereo
or
mono
programs.
The
STEREO Indicator lights when the broad-
cast is in stereo.
PHONO/MIC:
When
playing records or using a micro-
phone.
AUX:
To
play component
connected
to the
AUX input jacks.
VOLUME
CONTROL
Adjusts sound volume of both speakers and headphones.
Clockwise rotation increases volume.
LOUDNESS
BUTTON
Compensates
for human
ear
response
to low
sound
volumes. Push this button to ON (depressed position) to
enhance low and high frequencies when listening at low
volume levels.
Advertisement
