Fujitsu AIRSTAGE ASTH07KMCD Operation Manual page 5

CAUTION
• To prevent malfunction or damage of the remote
controller:
- Place remote controller at where will not be
exposed to direct sunlight or excessive heat.
- Remove batteries if the product is not going to be
used for an extended period.
• Obstacles such as a curtain or wall between the
remote controller and the indoor unit may affect the
appropriate signal transmission.
• Do not apply strong shocks to the remote controller.
• Do not pour water on the remote controller.
For Powerful operation ................. Refer to page 8.
Activates or deactivates the Powerful
operation.
For Airflow settings ....................... Refer to page 5.
Controls the fan speed.
Sets the automatic Swing operation.
Controls the up/down airflow direction.
For Timer operations ..................... Refer to page 6.
Activates or deactivates the Weekly timer.
Activates or deactivates the On timer, Off
timer, or Program timer.
Activates or deactivates the Sleep timer.
Starts the timer setting.
Sends the timer or clock setting to the indoor
unit. (Do not keep pressing for a long time.)
Forwards the timer or clock setting to the
next step.
Returns the timer or clock setting to the
previous step. (Do not keep pressing for a
long time.)
is not available.
Adjusts the value of the timer or clock
settings.
Starts the clock setting.
After replacing batteries
Press this button as shown in the following figure.
Use a tip of a ballpoint pen or other small object.
RESET
En-4