JVC XS-E843B Instruction Manual page 4

Press 2 times to switch mode (Bluetooth / AUX IN / USB).
Press 3 times to delete speaker's Bluetooth connection history information.
10. button
Previous song
11. button
Next song
12. button
Press 1 time to switch EQ mode.
Press 2 times to perform TWS connection.
Press 3 times to disconnect Bluetooth device.
13. USB port / AUX in / USB-C
USB Type-C and USB-C
TM
CHARGING
Before first-time use, fully charge the built-in battery. The charger is not included in
the package, please charge the speaker via a standard 5 V / 2 A charger or via a
PC. The charging indicator lights will flash during charging. All four indicator lights
will glow when the speaker is fully charged.
NOTE: The charging indicator light will flash when the battery is low.
IMPORTANT: Please make a complete charge every three months to avoid shortening the
battery lifespan.
BLUETOOTH
• Long press the
blue and hear a tone. The speaker is in pairing mode.
• Activate Bluetooth of mobile phone and search for device name "XS-E843B" then
connect it. If the pairing is successful, the MODE indicator light will be solid blue.
NOTE: The speaker will automatically shut down after 10 minutes in pairing mode if no devices
are paired.
Disconnecting the paired mobile phone
• Press 3 times the
The MODE indicator light will flash blue and the speaker will be in pairing mode.
TWS (TRUE WIRELESS STEREO)
The TWS technology enables you to use two speakers pairing via Bluetooth to
create a wireless dual-channel system to deliver true stereo sound effect.
• Turn on both speakers. Make sure both speakers are without any Bluetooth
connection.
• Double press the
connect automatically.
• The first speaker MODE indicator light flashes blue and the MODE indicator light
of the second one keeps solid blue.The TWS connection indicator lights of both
speakers will be solid white, which means both speakers are connected successfully.
• Pair your mobile phone with the first speaker, the MODE indicator light of both
speakers will be solid blue.
charging port
TM
are trademarks of USB Implementers Forum.
TM
button to turn on the speaker. The MODE indicator light will flash
button to disconnect the current device.
button on one of the speakers, the second speaker will
EN