IMAGO Vision Box Touch Hardware Manual page 20

6 Interfaces
Example 1: Connecting multiple cameras to a single output with high-current option.
VisionBox
Digital
Outputs
+ / VCC
OUT 0
OUT 1
OUT 7
Depending on the voltage and isolation requirements of the application, the Vision Box can be powered
from the same or from a different power supply.
Example 2: Connecting a relay to an output with high-current option.
VisionBox
Please note that a flyback diode as shown in the drawing should be used to protect the output circuit from
voltage spikes at deactivation.
Power VCC
Trigger IN
GND
Power VCC
Trigger IN
GND
Power VCC
Trigger IN
GND
Figure 12: Digital I/O example 1
Digital
Outputs
+ / VCC
OUT 0
OUT 1
OUT 7
Figure 13: Digital I/O example 2
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611
info@imago-technologies.com; www.imago-technologies.com
Camera A
Camera B
Camera C
Page 20 / 24
Power
+
Supply
-
+
Power
Supply
-