Table of Contents
Advertisement
5 Power Connector – Right Side
5 Power Connector – Right Side
Figure 5: Power plug
The
terminal can be pulled to GND to reset the Vision Box during operation. A falling edge will trigger
RST
the reset. Leaving the signal floating is the default mode for normal operation.
Phoenix Contact plug component: MC 1,5/4-STF-3,5 (order no. 1847071)
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611
info@imago-technologies.com; www.imago-technologies.com
Pin
Function
+24V
24 V power supply
No function
GND
Ground
PE
Shield / housing connection
Table 6: Power connector
Page 15 / 24
Advertisement
Table of Contents
