Lenovo ThinkPad X1 2-in-1 Gen 9 Hardware Maintenance Manual page 85

Hide thumbs Also See for ThinkPad X1 2-in-1 Gen 9:

Table of Contents

3. Remove the Jig.

For Haptic Touchpad

1. A trackpad jig might come with the trackpad which is used for fixing the location of the trackpad. Peel off

the adhesive tapes as shown by arrows

Note: Ensure that the seven dots on the Haptic Touchpad and the jig are aligned.

2. Install the Haptic Touchpad as shown and fold two tails backward:

Notes:

• Ensure that there is a folding-mark in the tails.

• Ensure that no screws are magnetically attracted on the Haptic Touchpad.

, and attach the trackpad jig to the trackpad surface

Chapter 8

Removing or replacing a FRU

Table of Contents

Thinkpad x1 carbon gen 12