PowerXL POWER AIRFRYER 360 Use & Care Manual page 33

Using the Accessories
Using the Crisper Tray
1. Insert the Drip Tray below the bottom
heating elements at the very bottom of
the appliance (Fig. A).
2. Use the markings on the door to
choose the shelf position recommend
for your recipe. Place food on the
Crisper Tray and then insert the Crisper
Tray into the desired slot (Fig. D).
NOTE: When using the Crisper Tray or
Pizza Rack to cook food with a higher
moisture content, use the Baking Pan
below the Tray or Rack to catch any
dripping juices.
Using the Rotisserie Spit
1.
Insert the Drip Tray below the bottom
heating elements at the very bottom of
the unit (Fig. A).
2. With the Forks removed, force the
Rotisserie Spit through the center of the
food lengthwise.
3.
Slide the Forks (1) onto each side of
the Spit and secure them in place
by tightening the two Set Screws
(2). NOTE: To support the food on
the Rotisserie Spit better, insert the
Rotisserie Forks into the food at
different angles (Fig. E).
4. Hold the assembled Rotisserie Spit
at a slight angle with the right side
higher than the left side and insert the
left side of the Spit into the Rotisserie
connection inside the unit (Fig. F).
5. With the left side securely in place,
lower the right side of the Spit into the
Rotisserie connection on the right side
of the unit (Fig. G).
6. To remove cooked food, insert a large
fork into the food, twist left, and raise
to remove the Spit from the left slot and
then remove the food from unit with
slight lifting motion. Transfer the food
to a carving board or serving plate.
S-AFO-001-LA_29391_SE_IB_A.indd 33 S-AFO-001-LA_29391_SE_IB_A.indd 33
Fig. D
2
Fig. E
Fig. F Fig. G
1
33
3/2/23 11:09 AM 3/2/23 11:09 AM