PART LIST P 20 P18 - WHEEL ASSEMBLY CAP - 50x25MM - 4 NOS. P1 - OUTER LEG -1080x710x40MM ROUND - 2 NOS. P19 - PLASTIC HANDLE - 2 NOS. P2 - LONG BRACE SUPPORT- 635x20x10MM - 4 NOS. P20 - BOLT TO ATTACH LONG BRACE SUPPORT WITH P3 - SMALL BRACE SUPPORT -578x20x10MM - 4 NOS.
Page 4
STEP 3 ATTACH SMALL BRACE SUPPORT (P3) WITH WHEEL ASSEMBLY (P4) USING NUT AND BOLT (P21) AND TIGHTEN IT WITH THE HELP OF TWO SPANNERS (P27) AT BOTH SIDES. STEP 4 ATTACH LONG BRACE SUPPORT (P2) WITH SMALL BRACE SUPPORT (P3) USING NUT AND BOLT (P20) AND TIGHTEN IT WITH THE HELP OF TWO SPANNERS (P27) AT BOTH SIDES.
Page 5
STEP 6 REPEAT STEP 2,3, & 4 FOR THE SECOND HALF OF THE TABLE. STEP 7 ATTACH BALL AND RACKET HOLDER (P26) WITH WHEEL ASSEMBLY (P4) USING TIGHTENING SCREW (P23) AT BOTH SIDES. STEP 8 TO OPEN, PULL THE PLASTIC HANDLE (P19) UPWARDS AND AT THE SAME TIME SLIGHTLY PULL OUTER LEG (P1) FOR OPENING THE TABLE AT BOTH SIDES.
Page 6
STEP 11 PULL PLASTIC HANDLE (P19) UPWARDS TO LIFT THE TABLE AND MAKE SURE SIDE LOCK PINS ARE LOCKED PROPERLY FOR STORAGE. Safety Instructions: Children below 14 years should not assemble the table. When lowering each half of the table top, make sure that the outer legs P6 are pulled gently outwards from the underside of the table, so far as they can go.