Related Manuals for Butterfly PowerPong 3000
Summary of Contents for Butterfly PowerPong 3000
- Page 1 PowerPong 3000-5000 Table Tennis Robot developed by Csaba Lukács Operation Manual Œ certificated!
- Page 2 • The ball throw discs rotate at high speed. For that reason, avoid touching the discs during operation! • The Table Robot PowerPong 3000-3001 should only be used in closed and dry rooms!. If you take this advice into account, your " PowerPong 3000-3001 " will always be a great training partner.
- Page 3 - 3 - 1. Assembly You should assemble the following main parts of the machine: - Integrated throw mechanism with net - DC 24V adapter (100-240 V net) - Control box - Extension cord - Control box holder Other belongings: Allan keys, throw disc, tube for setting distance, reserve rubber for the net, sticker vel- cro for fixing the robot 1.
- Page 4 - 4 - Please note: A sticker velcro can be found on the inner surface of the hanging unit that is mounted to the table. It is advised to stick the pair of this sticker found in the other belongings on the table, because so the machine stands much more stable on the table.
- Page 5 - 5 - 8 ball designa- 1-8 yellow LEDs (2 Up and down 2 designator press Buttons for selecting Buttons for saving Buttons for stepping tor press but- green) for showing button for buttons and LED line, memory place and and deleting in and out of memo- tons...
- Page 6 Attention: In case there wasn’t at all enough ball in the robot, then it fills up itself, which takes approx. 10 sec, and it throws the first ball only after this procedure. We can define the following elements in order to set the PowerPong 3000-3001 easier. The features of the thrown balls...
- Page 7 - 7 - In case pushing the “Sample” button the machine gives the actual ball (the one where the yellow LED flashes) and now its parameters can be changed. The robot throws such balls until the “Sample” button is pushed. Tip: Exclusively when only the first ball is assigned and the robot plays, its parameters can be also changed! So it is no need to push then the “Sample”...
- Page 8 In case of the PowerPong 3000 it is possible to set any of the balls of the rally during the play. If you set during the play the Trajectory, then the curve of each ball can be changed a bit in the same time the „Speed”, then the speed of each ball can be gently changed together...
- Page 9 Memory Base (basic) memory PowerPong 3000 makes possible to save 99 pcs of simple excercises. Saving excercises in the BASE memory In Stop or Ball/min=0 position or even during play you can get into the memory with the “Mem.t.” button.
- Page 10 - 10 - Cluster memory Power Pong 3000 is the only robot on the world which makes possible to save a range of (max. 32 rallies) different rallies and to play those automatically with short break between or in a random way like on a match.
- Page 11 - 11 - If you turn on the Type RND function at switching on the robot or during play, then the machine plays in random order the rallies saved in cluster. Always the first rally is played after start. Tip: If you put such rallies in the cluster which start with service, then the machine makes among these excercises always a 2 sec long break.
-
Page 12: The Remote Switch
- 12 - Please note: The robot stand to the so called basic ball also when switching it on, therefore this set can be also checked after switch on and without going in the Calibration function, and it is necessary to go to the Calibration only happening any deviation. Ideally the ball has no spin, no side-spin, and it must arrive 25-30 cm further from the middle of the table with middle speed and middle height. - Page 13 In case of the PowerPong 3000 the release height is adjusted in the following way: it is quite easy to push down the net thanks to its spring holding mechanism (Fig. 11.)
-
Page 14: Maintenance And Repair
- 14 - 4. Maintenance and Repair Important: Before executing maintenance and repair works, always first unplug from the mains! − During the operation of the ball machine, make sure that no small parts (for example hairs, in- dented balls, etc.) get into the collection net and thus into the machine, because they can lead to ball jams. - Page 15 - 15 - Then the ball throw disc is pulled off the motor shaft. (Fig. 19.a,b,) Take away the plastic discs from the ball throw foam (it is held together by three screws) and insert those onto the new foam disc. Fix this set again with the three screws.
-
Page 16: Error Management
Body with net Feeding motor mobil -101 mobil -108 Robot head Oscillating head motor PowerPong 3000 -102 Control unit mobil -109 Motor for height adjustment mobil -103 mobil -110 Holder for control unit Ball throw disc ... -
Page 17: Technical Data
Registration No.: AN 50091861 0001 Report No.: 17004848 001 as is apparent from Test Report No. NTEK-2010NT1115351E and NTEK-2010NT1115353SS The robot PowerPong 3000 is permitted to bear the CE trademark. Manufacturer : LCS Kft., Hungary- 2100 Gödöllő, Ibolya u. 50. e-mail: lcs@amicusrobots.com www.lcs-sport.hu...