Table of Contents
Advertisement
Instruction manual
BATTERY CHARGERS SERIES
INTRODUCTION
Thank you for your trust and purchase of this modern battery charger of the BHFL series for charging 12V or 12V and 24V
lead batteries (acid, GEL, AGM, lead-calcium and lithium batteries with integrated BMS (battery management system)
and supply of the automotive electrical system. This microprocessor controlled, primary clocked high frequency charger
corresponds to the latest charging technology. Please treat the device with care and attention so that it can serve you well
for many years.
Please read these operating instructions carefully and follow the instructions before operating the charger.
IMPORTANT SAFETY INSTRUCTIONS
• Keep these safety instructions in a safe place.
• This device is not intended for use by children!
General precautions
Before using the device, the user must always carefully read these operating instructions.
Precaution against electric shocks
• Danger to life from electric shock: It is expressly forbidden to reach into the live device.
• To minimize the risk of damage to the plug and cable, pull on the plug instead of the cable when switching off the charger.
• Do not disassemble the charger. Service is not necessary and repairs can only be performed by a qualified service center.
Incorrect reassembly may result in a risk of electric shock or fire. If you suspect that the device is not working properly, dis-
connect the power plug and charging cables immediately.
• To avoid the risk of electric shock, disconnect the power plug before cleaning. The device is live as soon as the power cord
is plugged in, even if the device is still switched off.
• If the power cord or charging cables are damaged, they must be replaced.
2
(EN)
Advertisement
Table of Contents
