DoorBird A1071 Series Installation Manual
2-wire ethernet poe converter
Hide thumbs
Also See for A1071 Series:
- Installation manual (12 pages) ,
- Installation manual (28 pages) ,
- Installation manual (48 pages)
Subscribe to Our Youtube Channel
Related Manuals for DoorBird A1071 Series
Summary of Contents for DoorBird A1071 Series
- Page 1 Page 2-14 Installation Manual 2-Wire Ethernet PoE Converter Series A1071 Seite 15-28 Installationsanleitung 2-Draht Ethernet PoE Konverter A1071 Serie A1071 VERSION 1.3, MIN. HW 1.3...
- Page 2 You can always find the most up-to-date version of the installation manual on www.doorbird.com/support To make things easier we use the term ″Sender″ for the product ″2-Wire Ethernet PoE Converter Sender″ and ″Receiver″ for the product ″2-Wire Ethernet PoE Converter Receiver″.
- Page 3 Notice: Indicates a situation which, if not avoided, could result NOTIC E in damage to property. Important: Indicates significant information which is essential for the product to function correctly. Note: Indicates useful information which helps in getting the most out of the product. Hazard information WARNING ∙...
- Page 4 WARNING ∙ For safety, approval and licensing reasons (CE/FCC/IC etc.), unauthorized change and/or modification of the device is not permitted. ∙ The device is not a toy; do not allow children to play with it. Do not leave packaging material lying around. Plastic films/bags, pieces of polystyrene, etc.
- Page 5 ∙ Do not put any metal or flammable material into the device. Fire, electric shock, or device trouble could result. ∙ Existing wiring such as chime wiring, etc. may contain high voltage AC electricity. Damage to the device or electric shock could result. Wiring and installation must be done by a qualified eletrician.
- Page 6 WARNING ∙ On devices with intercom, be sure to perform a call test with low audio volume on both intercom devices. A sudden call etc. may arrive causing for example damage to your ear. ∙ If the device does not operate properly, unplug the power supply. ∙...
- Page 7 ∙ Keep the device more than 1 m (3.3') away from microwave, radio, TV, wireless router and any other wireless devices. ∙ On devices with intercom or built-in speaker or built-in microphone or signal transmission functions, keep the wires more than 30 cm (12'') away from AC 100-240 V wiring.
- Page 8 Transportation When transporting the device, use the original packaging or NOTIC E equivalent to prevent damage to the device. Warranty Information For information about the device warranty, see www.doorbird.com/warranty COMPONENTS 1x Sender 1x Receiver 1x Installation manual 1x Quickstart guide...
-
Page 9: Installation
Please ensure that the upload speed of your Internet connection is at least 0.5 Mbps. You can also carry out a speed test at any time via the DoorBird App. The user experience is only as good as your network speed, network... - Page 10 stability and quality of your network components, such as your Internet router and WiFi access points or WiFi repeaters. Please also make sure that your net- work components are not older than two years, have been manufactured by a well-known manufacturer, and have the latest firmware installed. Should these requirements not be fulfilled, it may happen, for example that the performance of audio and video is poor or push notifications are delayed or do not arrive on your smartphone or tablet at all.
-
Page 11: Step 4: Receiver Installation
Port ″1″ and ″2″ of the Sender. Please take care of the polarity of the 2-wire cable (″1″ and ″2″). A PoE-Switch (e.g. D-Link DGS-1008P) or PoE-Injector (e.g. DoorBird Gigabit PoE Injector) in accordance with the PoE standard IEEE 802.3af Mode A (network cable wires 1, 2, 3 and 6) must be used to power the Sender. -
Page 12: Diagnostic Leds
STEP 5: ACTIVATING THE DEVICES Switch on the power leading to the assembly location again. Make sure to switch on power of the PoE-Switch / PoE-Injector you have connected to the Sender. The Diagnostic-LEDs of RJ45 jack of the Sender and Receiver should be blinking and thus signaling an established power- (PoE) and network connection. -
Page 13: Legal Notes
Required accessories: 2 x Network cable, IEEE 802.3 af/ General remarks at PoE Switch or PoE Injector, e.g. 1. DoorBird is a registered trademark of Bird Home Automation GmbH. DoorBird Gigabit PoE Injector, D-Link DGS-1008P or TPLink TL-PoE150S 2. Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc. - Page 14 10719 Berlin Germany If necessary, indicate the presence of the device in a suitable place and in a suitable form. Web: www.doorbird.com Email: hello@doorbird.com Please observe any relevant country-specific statutory regulations concerning the use of surveillance components and surveillance cameras applicable at the installation site.
Need help?
Do you have a question about the A1071 Series and is the answer not in the manual?
Questions and answers