Installing The Nano-Sim & Microsd Cards - Lenovo K6 NOTE Quick Start Manual

Installing the Nano-SIM & microSD cards
Dual-SIM model
A Nano-SIM card provided by your carrier is required in order to use
cellular services
Install the Nano-SIM cards and the microSD card as shown
Step 1. Insert the eject tool that comes with your smartphone into the
hole in the card tray.
Step 2. Pull out the card tray and do one of the following:
● Position a Nano-SIM card in Slot 1 and a microSD card in
Slot 2;
● Position a Nano-SIM card in Slot 1 and another Nano-SIM
card in Slot 2
Step 3. Carefully insert the tray with the installed cards back into the
slot.
① Only Nano-SIM cards work with your smartphone.
② Always turn off your smartphone first before you insert or remove
a Nano-SIM card. Insert or remove a Nano-SIM card with your
smartphone on may damage your Nano-SIM card or smartphone
permanently.
③ Both of the card slots support 4G/3G/2G data services, but you can
enable only one Nano-SIM card for data connection at a time. If you
want to change the Nano-SIM card used for data connection, go to
Settings > SIM management.
. A microSD card is required to store data.
①
.
③
3
.
②