Advertisement
Installing the Nano-SIM & microSD cards
A Nano-SIM card provided by your carrier is required in order to use
cellular services
Install the Nano-SIM cards and the microSD card as shown
Step 1.
Insert the eject tool that comes with your smartphone into
the hole next to the card tray.
Step 2.
Pull out the card tray and do one of the following:
Position a microSD card in Slot 1 and a Nano-SIM card
in Slot 2;
Position a Nano-SIM card in Slot 1 and another
Nano-SIM card in Slot 2
Step 3.
Carefully insert the tray with the installed cards back into the
slot.
① Only Nano-SIM cards work with your smartphone.
② Always turn off your smartphone rst before you insert or remove a
Nano-SIM card. Insert or remove a Nano-SIM card with your
smartphone on may damage your Nano-SIM card or smartphone
permanently.
③ When two SIM cards are inserted, both SIM card slots support
4G/3G service. But you can enable only one Nano-SIM card for data
connection at a time. If you want to change the Nano-SIM card used
for data connection, go to Settings > Network & Internet > Cellular
networks & SIM.
. A microSD card is required to store data.
①
.
③
2
.
②
Advertisement
