Panasonic WV-BP130 Operating Instructions Manual page 14

FOCUS OR FLANGE-BACK ADJUSTMENT
The following adjustment should be made by qualified 3. Tighten the screws on the flange-back adjusting
service personnel or system installers, ring.
1. Loosen the screws on the flange-back adjusting
ring.
Focus adjustment for
CS-mount lens
Focus adjustment for
X a lens
Flange-back
Adjusting Ring
Screws
2. Turn the flange-back adjusting ring to the desired
position.
Caution: When the C-mount lens ís mounted, do
not rotate the ring counterclockwise by force
after it stops. If the ring is rotated by force, the
inner lens or CCD image sensor may be dam-
aged.
-12-