Sencor SCA BA02 User Manual

SCA BA02
User's manual Breathalyser
Carefully read the entire user's manual before using the device and understand the safety measures and detailed operating
instructions for the device. Store the user's manual in a safe place for future reference. If you sell the device do not forget
to provide the user's manual to the new owner together with the device and its accessories.
Important safety measures
IMPORTANT!!!
Using the breathalyser immediately after or within 15 minutes of consuming alcohol may damage the detection sensor
and there is a danger of future measurements being inaccurate. Unprofessional operation of this device is not covered
by the warranty.
e Do not perform tests in strong winds or in a closed room, which is filled with cigarette smoke or contains alcohol
vapours.
e Ifthe flat batteries symbol appears on the display, replace them with new ones.
* Do not blow smoke, food or liquids into the mouthpiece.
e Use the device only in an environment where temperatures are between +10 and +40 °C. Use in an environment outside
this range may damage the device and may lead to incorrect test results.
e The level of alcoho! in the breath depends on many factors that change over time. The level can change already several
minutes after the initial test.
e The measurement results of this device cannot be used as evidence in legal proceedings.
e The information obtained using this device is only informative in nature. We recommend that it is not used for making
decisions about the ability to perform any activity requiring responsibility. Several factors (e.g. natural gas remains,
smoke and undesirable breath) may influence the level of the measured values.
* Do not allow yourself or anybody else to drive a vehicle after consuming alcohol. If you have consumed alcohol always
organise for a designated driver or use an alternative form of transport.
e Neither the vendor nor the manufacturer are responsible for damages caused by the use of this device.
NEVER DRINK ALCOHOL IF YOU ARE PLANNING TO DRIVE A MOTOR VEHICLE!!!
Attention: It is recommended to have the accuracy of the device tested after a year of use. With more frequent use the
lifetime of the device may be used up and the measurement results may not be accurate.