TABLE OF CONTENTS 1. Important safety instructions ......................3 2. Measurement ............................. 3 3. Battery Installation ..........................4 Recommendation: ..........................4 4. Device description ..........................5 5. Controls ..............................6 Turning the unit on and off ......................6 Starting breath alcohol test ......................6 Memory function ..........................7 Alcohol units and alert level settings ....................7 Important notes ..........................
NEVER DRINK ALCOHOL IF YOU ARE PLANNING TO DRIVE A MOTOR VEHICLE!!! 2. Measurement • The SCA BA10 Personal Breathalyser is a hand-held non-certified measuring device, the measured value may differ from that of a certified device. • Refrain from drinking alcohol and smoking at least 15 minutes before measurement.
Recommendation: For the most accurate measurements, we recommend replacing the internal measuring module with a new pre-calibrated one after prolonged use of the instrument. This horizon is not precise, we recommend e.g. after 1–2 years of use or after 1–2 thousand measurements. Please contact your dealer or directly the authorized service centre of SERVIS FAST, ČR, a.s.
5. Controls Turning the unit on and off • Press the ON/OFF button once to turn the device on. • When the LCD display shows ”ALCO”, press and hold the ON/OFF button for about 2 seconds to turn the device off. Starting breath alcohol test •...
Memory function 1. Up to 20 results can be stored in the memory of this device. 2. Memory retrieval: press the memory retrieve button “m” to activate memory mode, then press the “m” button again to retrieve and display the last 20 results. 3.
2. Press the “ON/OFF” button to switch units: ‰BAC, %BAC, mg/L. 3. Press the “m” button to change the alert level, e.g. 0.10, 0.20, 0.30, 0.50, 0.80, 1.00‰ BAC. 4. Hold the “ON/OFF” button for 2 seconds to save the settings (“SAVE”). The device will return to test mode and count to 40 for the test.
6. Technical Data SCA BA10 Breathalyser with semiconductor sensor Displays alcohol concentration in blood Interchangeable pre-calibrated sensor in the instrument Automatic self-cleaning Digital LCD display with a three colour backlight Acoustic and visual signalisation Measurement: Measuring range: 0.000–3.000‰ BAC (blood alcohol concentration) Units of measurement: ‰BAC or mg/L...
Page 10
INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality. DISPOSING OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste.
Page 11
Cases when the claiming product cannot be indentified according to the presented documents (e.g. the serial number or the warranty seal has been damaged). Authorized service centers Visit www.sencor. for detailed information about authorized service centers. EN – 11...