Charging The Wireless Foot Switch Battery - Philips 4523 001 21821 Manual

3 Operation
1 Switch the wireless foot switch on using the power switch on the back of the foot switch.
Figure 2 Wireless foot switch power switch (monoplane foot switch shown as an example, also
2 Check the status of the indicator lights on the wireless foot switch to ensure that it has sufficient
charge and that the wireless connection is active.
For more information, see
3 To switch the wireless foot switch off, use the power switch on the back of the foot switch.
3.4

Charging the Wireless Foot Switch Battery

A charger is supplied to recharge the battery of the wireless foot switch.
NOTE
Use only the charger supplied with the wireless foot switch. Using any other charger may cause
damage to the foot switch and void the warranty.
1 Remove the cap from the charging port on the back of the wireless foot switch.
Figure 3 Wireless foot switch charging port (monoplane foot switch shown as an example, also
Wireless Foot Switch Addendum
applicable for the biplane foot switch)
Wireless Foot Switch Indicators (page
applicable for the biplane foot switch)
Charging the Wireless Foot Switch Battery
9).
11 Philips 4523 001 21821