Yamaha PF-1000 Owner's Manual page 87

PIANO (Piano Voice has been selected)
The explanations here apply to step #3 on page 85.
Determines the tuning curve, especially
for piano voices. Select "FLAT" if you
feel the tuning curve of the piano voice
does not quite match that of other
instruments voices.
STRETCH .. Tuning curve particularly
for pianos
FLAT .......... Tuning curve in which the
frequency is octave
doubled over the entire
keyboard range
COMMON
The explanations here apply to step #3 on page 85.
The parameters are the same
as for CONTROLLER display.
For details, see page 128.
Set the volume of the current edited
voice.
Determines the touch sensitivity, or
how greatly the volume responds to
your playing strength.
0 — –– Produces more dramatic
level drops, the more softly
you play.
64 — – Normal response.
127 — Produces high volume for
any playing strength (fixed)
SOUND (Regular Voice only)
The explanations here apply to step #3 on page 85.
1 2 3 4 5 6
1 2 3 4 5 6
1 2 3 4 5 6
Editing the voice — Sound Creator
The available parameters
differ depending on the
selected voice.
These controls are used to adjust the
brilliance of the tone. This setting
affects all Natural voices globally. When
other than piano voice (Natural) is
selected, set this on EFFECT page. For
details, see the EFFECT page
(page 89).
Determines the depth of
7 8
sustain sampling for the
damper pedal.
Set the portamento time of each
part (MAIN/LAYER/VOICE)
(Regular Voice only) (page 118).
This determines whether the voice
is played monophonically (Regular
Voice only) (page 58).
Shift the octave range of the
selected voice up or down in
7 8
octaves. When the Main or Layer
part's voice is used, the M/LYR
parameter is available; when the
Left part's voice is used, the LEFT
parameter is available.
Determines the filter, EG, and
7 8
vibrato settings (see below).
87
PF-1000