Safety instructions
Please read first
This device has been designed for use in LD Didactic
experiments, and is therefore only intended for use in
dry rooms. If the device is used for other measure
ments, the user is responsible for the risk assessment
and must take the necessary safety precautions.
All users should be instructed about the risk of electric
shock. The user of the measuring instrument must en
sure compliance with the guidelines of the trade associ
ation or other insurance carriers, country-specific re
quirements, as well as regulations for schools and uni
versities.
The Power Analyser CASSY meets the following stan
dards:
Instruction sheet 727 100
Power Analyser CASSY (727 100)
Power Analyser CASSY Plus (727 110)
Measuring channels U and I
1
2
Mask
Display
3
4
Rotary selector and OK button
5
Cursor buttons
Start button
6
7
Display selection
USB-C connector
8
9
Power switch
LEDs and buzzer
10
Relay
11
12
Potential equalisation connection
Output channels (only Power Analyser CASSY
13
Plus)
Output, function generator output (only Power
14
Analyser CASSY Plus)
EC/EN61010-1-2001
•
Safety regulations for electrical equipment for mea
surement, control, and laboratory use, Part 1: Gen
eral requirements
•
Rated voltage range: 700 V AC and 1000 V DC
•
CAT III 300 (see table of permitted types of mains).
•
Pollution degree 2.
•
Use the analyser and accessories only as specified
in the operating instructions. Failure to follow these
instructions may affect the protective functions pro
vided by the analyser.
Warning!
A "Warning" indicates circumstances and actions that
represent one or more sources of risk to the user.
Warning!
•
To avoid electric shock and fire hazard:
•
Read this entire manual carefully before using the
analyser and accessories.
•
Read all instructions thoroughly.
•
Do not work alone.
© by LD DIDACTIC GmbH · Leyboldstraße 1 · D-50354 Hürth · www.ld-didactic.com
Tel: +49-2233-604-0 · Fax: +49-2233-604-222 · Email: info@ld-didactic.de · Technical alterations reserved