Fm Outdoor Antenna - Kenwood KT-7020 Instruction Manual

Am/fm stereo tuner
Hide thumbs Also See for KT-7020:
Table of Contents

Advertisement

a
a
SIAR
I
TTA
SOE
ET
ET
ICE LST
TE
EY SE
@ FM outdoor antenna
Consult with your dealer or service man about the best
method of selecting and erecting an outdoor FM antenna.
The choice of lead-in (feeder) wire is also important. The
flat ribbon-shaped twin lead performs well electrically, is
cheaper and is somewhat
easier to handle
in routing
through windows
and around
rooms.
Coaxial
cable
is
more
expensive, does a much
better job of minimizing
interference, is less prone to the effects of weather and
close-by metal objects, and is nearly as good a signal
conductor as the ribbon type wire. The latter is particularly
true of foam-type coaxial cables. Coaxial cable is some-
what more difficult to install at the point where the cable
enters the building.
H Connection of coaxial cable
M@ FM outdoor antenna setting
® To minimize auto-ignition noise, locate the antenna as
far from heavy traffic as possible.
© Keep the feeder or coaxial cable as short as possible.
Do not bundle or roll up excess cable.
@ The antenna should be placed at least two meters (6.6
feet) from reinforced concrete walls or metal structures.
@ T-shaped FM indoor antenna
The T-shaped FM antenna shall be used as a preliminary
for the period before a dedicated FM outdoor antenna is
installed.
Arrange the coaxial cable as illus-
trated.
Remove
the
band
and
insert the
Open
the
75
ohm/300
ohm
an-
tenna adaptor.
Press the claws in the direction of
the arrows with the fingers to re-
lease the lock and pull out the cover.
Faster the band with screws, using a
screwdriver.
Detach the ring from the antenna
adaptor. Then
put the ring on the
pole in the cover.
Pole
(Cover)
(Antenna adaptor)
Close the cover.
Connect the adaptor to the antenna
inner conductor to the slit.
Band
terminal.
Supplied
3. To
FM indoor
tighten
antenna
screw
rd
=
(
2. Insert antenna
cable
Antenna adapter
Plug securely into FM
ANTENNA jack.
Set to
receiving
1. Find the
mode.
position that
provides best
reception.
2. Fix two ends.
KT-7020 (tn)
7

Advertisement

Table of Contents
loading

Table of Contents