Table of Contents
Advertisement
5.0 Application of the Punch and Die Sets
• This device includes 10 punch/dies: PRR-10, PRR-11, PRR-12, PRR-13, PRR-14, PRR-15, PRR-16, PRR-17,
PRR-18, PRR-19
• The punch and dies must be screwed in completely to the arm and the gun. During use, the pressure must
not be on the threads of the dies. They must be firmly seated or they could break during operation.
• Never operate the rivet gun without any material between the clamps. Operating the rivet gun without
metal between the dies will cause damage to the punch and die. Do not operate or charge the rivet
gun or batteries in a dust filled environment.
• Choose the correct punch and die set for the application.
Advertisement
Table of Contents
