Software Installation - Yamaha CVP-210 Installation Manual

Software Installation

• For details about the application software which has no installation guide
described below, refer to the online manual of each software.
Uninstall (Removing the installed application)
You can remove the installed application software.
Select [START] [Settings]
Remove Programs] [Install/Uninstall], then select the
application to be removed and click [Add/Remove...].
Follow the on-screen instructions to uninstall the application.
• The button names or menus may differ depending on the computer
OS.
■ Acrobat Reader
In order to view the electronic (PDF) manuals included with each
application, you'll need to install Acrobat Reader.
• If an older version of Acrobat Reader is installed on your PC, you'll need to
uninstall it before proceeding.
1
Double-click on the "Acroread_" folder.
Four different language folders will be displayed.
2
Select the language you want to use and double-click on its
folder.
The file "ar***.exe" file will be displayed. ("***" indicates
the selected language.)
3
Double-click on "ar***.exe."
Acrobat Reader Setup Dialog box will be displayed.
4
Execute the installation by following the on-screen direc-
tions.
After installation is complete, the Acrobat folder appears on your
PC (in Program Files, as the default).
For information on using the Acrobat Reader, refer to the Reader
Guide in the Help menu.
■ USB MIDI Driver
To operate the MIDI instrument from your computer via USB,
you'll need to install the appropriate driver software.
The USB-MIDI driver is software that transfers MIDI data back
and forth between sequence software and the MIDI instrument via
a USB cable.
Computer
Sequence
Software
USB cable
Driver
[Control Panel] [Add/
MIDI instrument
Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE
Windows 98/Me users
Windows 2000 users
Windows XP users
• Before you install the USB MIDI driver, you can minimize the possibility of
problems by putting your computer in the following state.
• Close all applications and windows that you are not using.
• Disconnect all cables from the MIDI instrument except for the cable
whose driver you are installing.
Installing the driver on a Windows 98/Me system
1
Start the computer.
2
Insert the included CD-ROM into the CD-ROM drive.
3
Make sure the POWER switch on the MIDI instrument is set
to OFF and use the USB cable to connect the USB terminal
of the computer (or the USB hub) to the USB terminal of the
MIDI instrument. When the MIDI instrument is turned on,
the computer automatically displays the "Add New Hardware
Wizard." If the Add New Hardware Wizard does not appear,
click "Add New Hardware" in the Control Panel.
• In Windows Me, check the radio button to the left of "Automatic
search for a better driver (Recommended)" and click [Next]. The
system automatically starts searching and installing the driver. Pro-
ceed to step #8. If the system does not detect the driver, select
"Specify the location of the driver (Advanced)" and specify the CD-
ROM drive's "USBdrv_" to install the driver.
Windows 98
Windows Me
For Windows Users
See below.
See page 4.
See page 5.
3