Frequency Of Electrical Safety Testing - Trio SAFETCHECK Pro Logger II Operating Instructions Manual

Frequency of electrical
safety testing
(Guide only)
The minimum recommended frequency of safety testing of electrical equipment is specified in
Australian Standard for in service testing AS/NZS 3760.
Type of environment in which
equipment is used
Factories, shops & places of work manufacturing,
repair, maintenance or construction
Office environment where equipment
is not subject to constant flexing of
the supply cord
Other commercial environments, e.g.
tea rooms, office, kitchens, health care studios, with
no protection
Construction and Demolition sites
Hire equipment
Note: Some organisations may alter these periods based on a documented risk assessment, undertaken
in accordance with the process specified in AS/NZS 4360 (see AS/NZS 3760 for details).
5
earthed Double insulated
appliance appliance
6 months 12 months
5 years 5 years
12 months 12 months
3 months 3 months
Before each hire Before each hire
extension
cords
6 months
12 months
6 months
3 months
Before each hire
SafeTcheck Pro Logger II