Servicing The Secondary Air Filter Element - Cub Cadet EX2900 Operator's Manual

8. Reinstall the air cleaner element.
If necessary, remove and discard the old primary
element, and replace with a new primary filter element.
9. Reinstall the air cleaner canister cover. Make sure that
the rubber dust unloading valve points downward.
10. For correct installation, follow the instruction molded
onto the canister cover.
11. Hook the two latch hooks onto the air cleaner canister.
12. Lower the canister.
13. Push the top of the latches inward toward the canister
cover to lock the latches and secure the canister
cover.
NOTE:
●Replace at least once a year.

2. Servicing the Secondary Air Filter Element

1. Remove the air cleaner canister cover.
2. Remove the primary air filter element.
3. Clean the inside of the air filter element base.
4. Remove the secondary air filter element and then
install a new one.
IMPORTANT: Avoid damage.
●Do not reuse the removed secondary air filter element.
5. Reinstall the primary air filter element.
6. Reinstall the air cleaner canister cover.
7. Lower the hood.
(A) Secondary air filter element
(B) Air filter element base
NOTE:
●Replace at least once a year.
IMPORTANT:
●The main purpose of the secondary filter is to protect the
engine against dust that can occur as a result of removal
of fouled-up primary filter. Therefore, in principle, do not
draw out the secondary filter during a maintenance work
for the primary filter.
14. PERIODIC SERVICE
P3013732
14-23
(B) (A)
Ex2900 / 3200 Operator's Manual