Table of Contents
Advertisement
LIGHT CONTROL KEY
You can control the mood lighting through this button.
Light
In the power-on mode, the colorful lights automatically change in cycle.
When you change to your favorite mood light color, you can keep your
favorite light color unchanged by lightly touching the light fix button.
Touch again to turn off the lights and cycle through them.
SLEEP MODE KEY
Sleep mode can be switched with this button.
Sleep
The default is the highest dehumidification level in power-on mode.
Sleep mode can be entered by touching this button.
The power will be reduced, the noise will be reduced, and the lights will
be turned off.
Tap again to return to normal mode
*Using this machine in normal mode will produce a certain sound. If you
want the sound to be reduced, you can press the sleep mode button to
enter sleep mode, and the sound will be reduced.
CONSTANT HUMIDITY FUNCTION, HUMIDITY + KEY
You can use this button to increase the set humidity.
Each time this button is pressed, the set humidity increases by 5%.
When the ambient humidity is lower than the set humidity,
The dehumidifier will automatically stop.
*Humidity adjustment: maximum value 90% minimum value 40%
CONSTANT HUMIDITY FUNCTION, HUMIDITY - KEY
You can use this button to increase the set humidity.
Each time this button is pressed, the set humidity increases by 5%.
When the ambient humidity is lower than the set humidity,
The dehumidifier will automatically stop.
*Humidity adjustment: maximum value 90% minimum value 40%
HEPA FILTER REMINDER
(LONG PRESS TO RESET AFTER REPLACEMENT)
Filter
The HEPA filter inside the fuselage turns on a red light after 1,000 hours
of use.
After replacing the filter, press and hold for 5 seconds to reset.
Advertisement
Table of Contents
