Table of Contents
Advertisement
en-us Cleaning and maintenance
Remove all detergent
residue, spray residue, or
other residues immediately.
Leave the appliance door
open after use.
18.2 Water tank filter
The filter in the water tank protects the appliance from dirt
and contaminants.
Cleaning the water tank filter
Check the filter regularly and clean the filter if it is dirty.
Requirement: The condensation container → Page 26 is
removed from the appliance.
Pull out the filter.
1.
Clean the filter under warm, running water or in the
2.
dishwasher.
Insert the filter.
3.
Insert the condensation container → Page 27 .
4.
32
Fresh deposits are easier to
remove without leaving any
residue.
This allows the residual
water to dry, reducing odors
in the appliance.
18.3 Moisture sensor
The moisture sensor in this appliance measures how
damp the laundry is during the drying cycle. The appliance
changes the duration of the automatic program depending
on the residual moisture in the laundry.
Cleaning the moisture sensor
Over time, residue from limescale, detergents, and care
products can build up on the moisture sensor. Clean the
moisture sensor regularly.
NOTICE:
Hard or rough objects may damage the moisture sensor.
Do not use hard or rough objects, abrasive cleaning
▶
products, or steel wool for cleaning.
Note: If you do not clean the appliance as described, the
appliance's functionality may be impaired.
Open the door.
1.
Clean the moisture sensor with a sponge.
2.
18.4 Condensation container filter
During drying, lint from the laundry gets into the
condensation. The filter in the condensation container
protects the appliance from lint.
Cleaning the condensation container filter
The filter is cleaned automatically when the condensation
container is emptied. Check the filter regularly and clean
the filter if it is dirty.
Empty the condensation container.
1.
→ "Emptying the condensation container", Page 26
Advertisement
Table of Contents
