Location And Function Of Controls - Sony XE-744 Operating Instructions Manual

Location and Function of Controls
mm
See the pages in & for details.
(1] FAD (fader control) button (D (3) Display window
Note
Ensure to set the fader control of the connected [4] DIM (dimmer) button
master unit to the center position. You can select the brightness of the display
[Z] SUB W (subwoofer LPF* frequen window according to the surroundings.
a adjust mode) Ee © Each time you press the button, the
You can select the LPF freguency of the brightness of the display window changes
subwoofer's output.
as degi :
;
Each time you press the button, the LPF dark — bright — dar
freguency changes as follows: [5] ILM (illumination select) button
70 Hz -» subwoofer — 300 Hz — 100 Hz You can select the color of the illumination
| output off | of the operational buttons either from amber
= or green to suit the illumination color of your
+ Low-pass filter master unit.
Each time you press the button, the color
changes as follows:
green — amber — green
+/- (level adjust) button
SENS (spectrum analyzer sensitivity
adjust) button Ê