Adjusting the Balance of the Fader
Press the FAD button.
The unit enters the fader control mode.
FADER
au
(The "FADER" indication appears on the
adjustment mode display section of the
display window.)
Adjust the balance of the front and rear speakers with the +/- button.
To decrease the volume of
the rear speakers
To decrease the volume of
FADER
t
the front speakers
T
(The level indication goes up or down
according to the volume level.)
Press the FAD button.
mu
„B
(The display returns to that
of the spectrum
analyzer.)
Notes
+ Be sure to set the fader control on the connected
master unit to the center position.
* it you do not proceed with the operation described in
steps 1 and 2 within 15 seconds, the fader control
mode will be cancelled.