Adding Variations To The Sound - Reverb - Yamaha Clavinova CLP-110 Owner's Manual

Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
Procedure
When you select a reverb, the reverb is automatically turned on.
While holding down the
type.
VOICE
Key Reverb Type
C2 Room
C 2 Hall1
D2 Hall2
D 2 Stage
E2 Off
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while
holding down the
VOICE
The lowest key
18 Selecting & Playing Voices
CLP-110
button, press one of the C2–E2 keys to select a reverb
[VOICE]
The lowest key
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
For a "bigger" reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
[VOICE] button. The depth range is from 0 through 20.
The depth value increases as you press higher keys.
C 2 D 2
C2 D2 E2
Description
G 4: depth 20
C3: depth 0
TIP
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
TIP
depth 0: no effect
depth 20: maximum reverb
depth