O3 Pure PE1000XLS Owner's Handbook Manual page 4

O3 PURE OZONE LAUNDRY SYSTEM FOR USE WITH COLD WATER ONLY .
Installation instructions should be reviewed prior to installation.
Prior to Installation
1. Remove O3 Pure Eco Laundry System (LS) from packaging and inspect for any
shipping damage. Keep packaging in the event of return for warranty.
2. Check to ensure you have all components : (Fig. a) (a.1) 1 x O3 Pure LS Unit,
(a.2) 1 x Power adapter, (a.3) 2 x Screws and Molly's, (a.4) 1 x Water hose,
(a.5) 1 x Screwdriver, (a.6) O3 Pure LS Quick Install Guide, (a.7) Owners Handbook
with Warranty card.
3. The O3 Pure LS can be attached to any wall near your washing machine. However
check to make sure the power adapter will reach the electrical socket and that the
water hose will reach from the O3 Pure LS unit to the washing machine. If the hose
is not long enough, another longer hose can be used.( Fig. b)
Use & Safety Considerations
Before using, please read the Owners Handbook carefully.
➥
Do not operate the unit with the cover removed.
➥
Disconnect all power before servicing.
➥
Do not use a power adapter other than the one provided with your O3 Pure LS unit.
➥
Maximum water inlet pressure is 100psi.
➥
Leave the existing hot water as originally installed. Change the wash and rinse
➥
cycles to cold/cold.
Mount the O3 Pure LS unit horizontally only.
➥
O3 Pure LS is designed for residential use only and is not intended for use in a
➥
commercial or industrial setting.
Page 2
Owners Handbook