Kenwood SW-300 Instruction Manual page 9

Installation of the feet
This Subwoofer may be msialled using the tour
feet supplied, or it may be placed directly cxi the
floor.
Specifications
Type Subvyoofer sysiem with built-in
amplifier
[Amplifier]_
100 watts RMS. at 4Q. from 20
Hz
to 200 Hr wlh no more
than 0.04% total harmonic disiortion. (FTC) _
Phase switching.NORMAL. REVERSE
Irtput Sensitivity & Input ImpedarKe
RCA-type pin-plug jack_70mV(l2kfi}
Posh-type termirwis.1.7V<5kn)
Supply Voltage.AC 110V"120V
Rated Power Consumplion .. 120W
[Speaker]
Enclosure.
Speaker Units.
Nominal Impedance
Dimensions.
Net Weight.
Supplied Accessories
Vented
250mm (10') Cone type
40
W:400mm (15 3/4*)
H:400mm(15 3/4')
D:400mm (15 3/4*)
16.5kg (36.38 lb)
Speaker cord
Feet<4>
Not*;
■ -
— ' —
KEfWWOOD follows a policy continuous advancement in devotopmem For ihls reason specifications may be changed without ntMico