Advertisement
L.PEQ is a parametric EQ with a wide Q centered at 200 Hz. This is known as a desk
filter, and it helps minimize the low-mid buildup created by large reflective surfaces
like a large mixing board, aka "desk," or a large workstation.
Note: Setting "2" utilizes both the boundary condition filter and the desk filter.
Turn the function knob and press to select High EQ. Turn the function knob to
scroll to the desired High EQ setting and press to select.
sounding and need less high-frequency content, while other studios are highly
damped or dark sounding and need additional HF content. These EQ selections will
help you dial in your monitors for your specific environment. Scroll to the Back
button and press to return to the previous MENU screen.
From the MENU screen select SETUP to adjust overall system preferences.
BACKLIGHT adjusts the brightness of the LCD's backlight. In a dim studio, a darker
backlight is easier on the eyes. To adjust your backlight to the lighting in the room,
we recommend turning it down until it's too dim and then slowly bringing it up
until it feels comfortable to look at.
CONTRAST: Once your monitors are in place, set for maximum image focus based
on your viewing angle.
STANDBY: Use this to engage or disengage the standby function. If standby is
engaged, the unit will go into sleep mode 30 minutes after no audio signal is
detected. The monitors will wake up when a -50 dB audio signal is present at the
input.
LOGO selects the front KRK logo: ON, DIM, or OFF. Set it to your desired setting
according to the ambient light in your studio. The logo also indicates power and
standby. When the monitor is in standby mode, the logo will slowly fade on and
off.
FACTORY RESET: Use this to restore the monitor to the default factory settings.
LOCK: Settings can't be changed until you unlock.
Integrated Mounting Points
The ROKIT G5 monitors include integrated mounting points on the bottom of the
enclosures. These mounting points are used with KRK mounting brackets, available
as a separate purchase, or with other brands of mounting brackets that have the
same hole mount pattern. (Note: See the specification data sheet for detailed
dimensional drawings.)
H. SHELF and H. PEQ EQs are often needed for use in a less-
than-optimum acoustical environment. Depending on
your room configuration and amount of acoustic
absorption, some studios are more reflective or bright
Advertisement
