Advertisement
in time does not need to be done continuously, so take your time and enjoy
listening to some music while you condition your monitors.
Faceplates and Protective Grille Faceplates
The ROKIT G5 monitors come with their protective grille faceplates installed. These
not only look great but are there to protect the monitor drivers from any advertent
finger pokes or accidental bumps. Your ROKIT G5 monitors also come with non-
protective faceplates that can be used if there is no danger of your monitor drivers
being damaged or if you prefer the look of the ROKIT G5 without the protective
grilles. If you do decide to use the protective grille faceplates, you can have
confidence that they will not affect the sound of your ROKIT G5 monitors. Because
of the design of the grille, there is no change in frequency response from grille to
no grille.
The faceplates are attached magnetically. To change the faceplate, simply reach
into the port near the left or right side and pull the faceplate forward and off, then
snap on the faceplate of your choosing.
Foam Wedge Monitor Isolation Pads
Your ROKIT G5 monitors come with Foam Wedge Isolation Pads to provide sonic
and vibrational isolation between your monitors and your workstation, which will
improve the accuracy of your entire monitoring system. They also provide a
mechanism to better position your monitors to angle them toward ear level in the
listening position. We recommend using the isolation pads even if you do not need
to angle your monitors.
A
B
C
ROKIT 5 Generation Five Shown for Reference
D
E
F
Advertisement
