Care And Maintenance - Danby DIPLOMAT DFF8801W Owner's Manual

Care and Maintenance
Frequently, a problem is minor and a service call may not be necessary, use this troubleshooting guide for
a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Danby's
Toll Free Number
for assistance.
r Sj i|mmiISfiSSSi; |pp f W
SI* 11 '
I
Does not work
No power to unit.
Wrong voltage is being used.
Power cord is unplugged.
Check connection of power cord at
power source.
Use proper voltage.
Plug in unit.
Refrigerator running
Temperature control too high.
Check setting and adjust as needed.
too frequently
Door is not closed.
Hot food inserted.
Doors opened too long
or too often.
Close proximity to heat source
or direct sunlight.
Close door securely.
Be sure that food is cool before inserting.
DO NOT keep door open for too long.
MINIMIZE door openings.
DO NOT place unit close to heat sources
or direct sunlight.
Internal temperature
too cold
Temperature control too high.
Check setting and adjust as needed.
Internal temperature
not cold enough
No power to unit.
Power cord is unplugged.
Temperature control too low.
Door is not closed.
Hot food inserted.
Doors opened too long
or too often.
Air flow obstruction.
Wrong voltage is being used.
Close proximity to heat source
or direct sunlight.
Check connection of power cord at
power source.
Plug in unit.
Check setting and adjust as needed.
Close door securely.
Be sure that food is cool before inserting.
DO NOT keep door open for too long.
MINIMIZE door openings.
Allow room for air to circulate around unit.
Use proper voltage.
DO NOT place unit close to heat sources
or direct sunlight.
Freezer is not cold
enough
Temperature control too low.
Door not closed.
Hot food is inserted.
Door opened too long
or too often.
Wrong voltage is being used.
Check setting and adjust as needed.
Close door securely.
Be sure that food is cool before inserting.
DO NOT keep door open for too long.
Use proper voltage.
_ight will not work
No power to unit.
Power cord is unplugged.
Bulb is loose, needs replacing
or the door switch is stuck.
Check connection of power cord to
power source.
Plug in unit.
Tighten or replace the bulb. Check the
switch for obstructions and clean.
5