26
TROUBLESHOOTING
No image is displayed.
•
Is the DC cable connected to the product?
- Make sure the DC cable is properly connected to the power disconnecting device.
•
Is the 'No Signal' message displayed?
- There is no connection between System Controller and the input source. Check the connection status of the LAN
cable.
- Access the Input menu to check the input source.
•
Does the 'Invalid Mode' message appear?
- Refer to the manual of System Controller.
The 'Unknown Product' message appears when the product is connected.
•
Did you install the driver?
- Refer to the manual of System Controller.
The screen image looks abnormal.
•
Is the screen position wrong?
- Refer to the manual of System Controller.
•
The screen is displayed abnormally.
- The proper input source is not connected to the port. Connect a cable that matches the input source signal.
•
The screen flickers or shakes.
- Check if System Controller is powered off.